For information on this past event please contact Meetings Management

POSTER SESSION

Poster 101
‘The fabrication and testing of auxetic textile structures’
Kim L. Alderson et al. (The University of Bolton, UK)

Poster 102
‘Influences of hydrophilic treatment on the properties of PP fiber and its hydroentangling performance’
Hong Wang et al. (Donghua University, Shanghai, China)

Poster 103
‘Statistical modelling of the thermal properties of extruded biodegradable fibres’
Alex Fotheringham and Basel Younes (Heriot-Watt University, Galashiels, UK)

Poster 104
‘Nanotube composite coatings as strain sensors on glass fibres in epoxy composites’
P. Sureeyatanapas and Robert J. Young (University of Manchester, UK)

Poster 105
‘On the spatial distribution of kink bands in uniaxial and bending compression of aramid fibres’
Sybrand van der Zwaag, Alwin Knijnenberg and Theo J. Dingemans (University of Technology, Delft, The Netherlands)

Poster 106
‘High performance synthetic and natural fibres in automotive friction materials’
Mike Sloan (University of Exeter, UK)

Poster 107
‘Surface functionalization of nonwovens by ITO sputter coating’
Qufu Wei, Robert R. Mather and Yingying Wang (Jiangnan University, Wuxi, China)

Poster 108
‘Preparation, morphology and thermal properties of PVDF/SiO2 nanofibres’
Qufu Wei et al. (Jiangnan University, Wuxi, China)

Poster 109
‘Effect of hybridisation on the surface morphology of nanofibres’
Qufu Wei et al. (Jiangnan University, Wuxi, China)

Poster 110
‘Modelling of auxetic particulate filled adhesive systems’
G. Chirima et al. (The University of Bolton, UK)

Poster 111
‘Improvement of tensile properties of CNT fibres by heat treatment’
N. Ibarra Gonzalez et al. (University of Cambridge, UK)

Poster 112
‘The electrospinning and spectroscopic investigation of novel polymer nanofibers’
C. Giller at al. (University of Delaware, USA)

Poster 113
‘Deformation micromechanics of cellulose whisker based nanocomposites’
R. Rusli and S.J. Eichhorn (University of Manchester, UK)

Poster 114
‘Effect of laser irradiation heating in melt spinning process of polyoxymethylene on structure and properties of resultant fibres’
W. Takarada et al. (Tokyo Institute of Technology, Japan)

Poster 115
‘Studies of deformation of carbon nanotubes using Raman spectroscopy’
S. Cui et al. (University of Manchester, UK)

Poster 116
‘Molecular and crystal deformation of poly(aryl ether ether ketone) fibres monitored by Raman spectroscopy and X-ray diffraction’
K. Kong et al. (University of Manchester, UK)

Poster 117
‘Preparation of PMMA nanofibres containing gold nanoparticles via electrospinning’
Y.T. Shyng et al. (University of Manchester, UK)

Poster 118
‘Surface modification and characterization of UHMWPE fibers’
B. Higgins et al. (US Naval Research Laboratory, Washington DC, USA)

Poster 119
‘Chemically selective crosslinking of high performance polymers’
D.L. Simonsen et al. (US Naval Research Laboratory, Washington DC, USA)

Poster 120
‘Raman study of carbon nanotubes in aramid fibres’
Libo Deng and R.J. Young (University of Manchester, UK)

Poster 121
‘Natural silk composite crashworthy structure’
Simin A. Oshkovr (UKM, Bangi, Malaysia)

Poster 122
‘Interlaminar fracture toughness of multi-layer woven silk fibre/polyester composites’
Simin A. Oshkovr et al. (UKM, Bangi, Malaysia)

Poster 123
‘Multiaxial failure criterions of laminated composites in a design process’
Sergio P. Santos et al. (Leiria Polytechnic Institute, Portugal)

Poster 124
‘Effect of heat treatment on the sturucture and properties of cellulose fiber from Lyocell process’
Huihui Zhang et al. (Donghua University, Shanghai, China)

Poster 125
‘Modified waste tyre particles in polypropylene-based blends’
M. Awang and H. Ismail (UMT, Terengganu, Malaysia)

Poster 126
‘Effects of waste tyre particles modification on properties of weathered polypropylene-based blends’
M. Awang and H. Ismail (UMT, Terengganu, Malaysia)

Poster 127
‘Structural modification of PET fiber to improve their performance as reinforcing material for thermoplastic composites’
C. Matin-Barrera et al. (CICY, Merida, Yucatan, Mexico)

Poster 128
‘Influence of molecular weight on ‘in-situ’ formation of cellulose nanofibres in NBR and on the mechanical properties of the composite’
M. Zabel et al. (DIK, Hannover, Germany)

Poster 129
‘A novel evaluation on catalysts for crosslinking agent’
Jong Hoon Kim et al. (Hanyang University, Seoul, Korea)

Poster 130
‘Electrospinning of poly(butylenes succinate) ionomers (PBSi)’
Jong Hoon Kim et al. (Hanyang University, Seoul, Korea)

Poster 131
‘Preparation and characterization of wet spun poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) fibers’
Soonchul Kwon and Sunghoon Jeong (Hanyang University, Seoul, Korea)

Poster 132
‘The influence of added co-solvent in the surface morphology of electrospun poly(lactic acid)
Soonchul Kwon and Sunghoon Jeong (Hanyang University, Seoul, Korea)

Poster 133
‘Preparation of poly(ethylene oxide)/silver nanocomposite by one-step process and its biocompatibility’
Soonchul Kwon and Sunghoon Jeong (Hanyang University, Seoul, Korea)

Poster 134
‘Novel antibacterial webs of chitosan/nano-silver prepared by electrospinning’
Soonchul Kwon and Sunghoon Jeong (Hanyang University, Seoul, Korea)